Can the AOG part and the technician fly together?

Fly the part and the technician together on one business jet to the grounded aircraft, with the tooling on board, so the repair starts on arrival.
AOG technician stepping off a business jet with the part and tool kit

Fly the part and the technician together and the repair starts the moment the jet lands. Most AOG events need a qualified technician as well as a part, so Elysium Jet arranges one business jet, operated by a certificated air carrier, that carries your technician, the part and the tooling directly to the grounded aircraft. One flight, one arrival, no separate connections.

The AOG part is half the fix; the technician is the rest

A part that lands at a remote airport with nobody qualified to fit it leaves the aircraft on the ground. In practice, the technician then arrives a day later on a scheduled flight. The aircraft stays grounded for that day too. Therefore the flight that ends an AOG carries both the part and the person.

This is why owners and maintenance providers ask us to fly the AOG part and the technician together rather than splitting them. The part travels under escort, the tooling is on board, and the technician steps off the aircraft and walks across the ramp to start work. For the parts-only version of this service, see our pillar page on AOG charter flights for aircraft parts.

What travels on one aircraft

A combined flight carries four things, and each one has a paperwork or handling consequence. First, the part, with its release certificate. Then your technician, either the owner’s own engineer or one sent by the maintenance provider. Then the tooling, which may include special tools and test equipment. Finally, the consumables the repair needs, which depend on their dangerous goods status.

What travelsWhere it ridesWhat we need from you
The partCabin or baggage hold, by sizeDimensions, weight, release certificate, dangerous goods status
The technicianCabin seatName as on passport, nationality, visa status for the destination
The tool kitHold, or cabin if small enoughCase dimensions and weight, list of any batteries or pressurized items
ConsumablesHold, subject to acceptanceSafety data sheets for sealants, oils, paints and aerosols

The release certificate matters because the receiving organization cannot fit a part without it. In the United States that is FAA Form 8130-3; in Europe it is EASA Form 1. The UK CAA publishes a reference table of which release certificates it accepts for components, by origin. As a result, we ask for a copy of the certificate before we book the flight, not after.

Your AOG technician, on board

When we fly the AOG part and the technician together, the technician travels in the cabin, with the tool kit in the hold or in the cabin depending on its size. There is no terminal, no baggage reclaim and no transfer. On arrival, the handling agent meets the jet on the ramp. The technician walks from the aircraft that brought them to the aircraft that needs them.

Two or three AOG technicians, or a recovery team

Some repairs need more than one person: an engine change, a landing gear fault, a structural inspection. A light jet seats six to eight, so a small recovery team flies with its kit on the same aircraft. For example, a midsize jet with an enclosed baggage area takes a three-person team, two tool cases and a part the size of a starter-generator without difficulty. In contrast, a wing or gear component usually needs a larger hold. We match the aircraft to the heaviest item first.

Tooling, batteries and dangerous goods

Regulations cover some tooling. Battery-powered equipment, pressurized nitrogen bottles, certain adhesives and solvents all fall under the dangerous goods rules. The operator decides what it will accept. You declare the contents of the tool kit with the part. Elysium Jet books an operator whose approvals cover the items. In short, every time we fly the AOG part and the technician together, the declaration comes first and the aircraft choice follows.

Lithium batteries are the most common issue. The FAA’s PackSafe guidance for passengers states that spare lithium-ion batteries must travel in the cabin and are limited to 100 watt-hours each. Batteries of 101 to 160 Wh need airline approval and are limited to two spares per person. You can read the FAA PackSafe rules for lithium batteries in full. We check battery-powered drills, torque tools and test sets in a technician’s kit against that threshold. Meanwhile, for batteries shipped as cargo, the IATA Dangerous Goods Regulations apply. The IATA lithium battery guidance sets out the packing instructions the operator will follow.

When the part is Cargo Aircraft Only

A few items cannot fly with people on board. Certain large lithium-ion batteries shipped alone, some oxygen generators and some chemical kits carry a Cargo Aircraft Only restriction under the IATA regulations. When that happens, the part flies on a freighter and the technician flies on a business jet, timed to arrive together. However, the restriction is a regulatory and operator decision, not ours, so we confirm it with the operator before quoting.

How fast can we fly the AOG part and the technician together?

Speed depends on four clocks: when the part is released, when the technician can reach the departure airport, how long the operator needs to position the aircraft, and whether the destination needs permits. Within the United States, an operator can often be airborne within three to six hours of a confirmed booking. That assumes the aircraft and crew are available and the crew’s duty time allows it. International sectors add overflight and landing permits. The authority that grants those decides the timing, not the broker or the operator.

Because the crew is held by its duty limits, a long sector may need a second crew or a technical stop. We say so in the quote. For example, a flight from the US East Coast to a grounded aircraft in the Caribbean is a single sector. A flight to West Africa is not, and the plan shows the stop and the crew change.

What a combined flight costs, as an estimate

Every figure below is an estimate, built on 2026-10-06 from published hourly rate bands, and the written quote replaces it. A light jet carrying one technician and a small part on a two-hour sector, at a band of roughly $5,000 to $7,500 per flight hour, lands in the range of $14,000 to $22,000 once you add positioning and handling. A midsize jet on a four-hour sector with a three-person team, at $7,000 to $10,000 per hour, is nearer $35,000 to $55,000. The basis for those bands is on our page on private jet hourly rates. The quote itself names the aircraft, the operator and the sector.

The return flight for the AOG technician

When the repair ends, the aircraft that brought the technician can fly them home. Alternatively, it can take the stranded passengers on with their trip while the technician returns on the repaired aircraft, as described on our page about an aircraft AOG abroad. We plan both options at the same time as the outbound. Therefore there is no second call to make at midnight.

The quiet advantage when you fly the AOG part and the technician together is that we plan the return before anyone leaves. In practice the aircraft either waits on the ground at the destination or repositions and comes back. Waiting costs crew time and parking; repositioning costs flight hours. The quote shows both, and the owner picks. For owners who face longer groundings, the same desk covers supplemental lift for aircraft owners until the aircraft is back in service.

What we need to fly the AOG part and the technician together

A quote for a combined flight needs five things. Most of them are already in the AOG message your maintenance provider sent. Send them in any order; we assemble the plan.

  • The number of technicians, with names as they appear on their passports.
  • The tool kit dimensions and weight, and a list of any batteries, gas bottles or chemicals inside it.
  • The part details: dimensions, weight, release certificate and dangerous goods status.
  • The destination airport and the deadline for the repair to start.
  • Whether the aircraft returns with the technicians or flies on with passengers.

With those five, the desk sends a written quote within 10 minutes with three aircraft options. Then, once you confirm, the operator issues the booking and assigns the crew.

Who operates the flight

Elysium Jet is a charter broker. When you ask us to fly the AOG part and the technician together, the flight is operated by a certificated air carrier that holds operational control, under 14 CFR Part 135 in the United States or the foreign equivalent. We name the operator on every booking. We do not own aircraft and we do not employ crews. As a result, the decision to accept a given item of tooling or a given part rests with the operator. We tell you what the operator has said in writing.

Owners who want this service on standby rather than on demand can set it up in advance, so the desk already holds the aircraft profile, the usual tool kit and the technician list. For a grounding during scheduled work, see charter during aircraft maintenance.

Frequently asked questions

Can a mechanic fly with the part to a grounded aircraft?

Yes. The client’s technician, the part and the tooling fly on one business jet to the airport where the aircraft is grounded. The technician sits in the cabin, the part and tool kit ride in the hold or cabin by size, and the repair starts on arrival. The operator confirms acceptance of each item before the flight.

Can the tool kit travel in the cabin?

Sometimes, depending on its size and on whether any item in it is regulated. A small case fits in a light jet cabin; a large one goes in the hold. Battery tools and gas bottles are declared in advance, because the operator decides what it will carry. Send the dimensions and a list of the contents with your request.

Can the same aircraft bring the technician home?

Yes. The aircraft can wait at the destination or reposition and return when the repair is done. Alternatively, it can fly the stranded passengers on with their trip while the technician returns on the repaired aircraft. Both options are priced and planned at booking, so there is no second request to make later.

What if the part can only fly on a cargo aircraft?

The part flies on a freighter and the technician flies on a business jet, timed so that both arrive together. The Cargo Aircraft Only restriction is set by the dangerous goods regulations and confirmed by the operator, not by the broker. We arrange both legs and align the arrival times at the destination airport.

How quickly can you fly the AOG part and the technician together?

Within the United States, an operator can often be airborne three to six hours after a confirmed booking, if the aircraft and crew are available and the crew’s duty time allows. International flights add overflight and landing permits, which the relevant authorities grant on their own timetable. The written quote states the earliest realistic departure and its conditions.

How to request a quote

To fly the AOG part and the technician together, call the desk any hour: New York +1 (929) 529-7339 · Dubai +971 54 703 1414 · Europe +33 6 88 26 83 22. Send the part details, the tool kit dimensions, the number of technicians and the destination. You will have a written quote with three aircraft options within 10 minutes. You can also reach us through the contact page.

Last verified: 2026-10-06.

Archive Posts

Elysium Jet: Where Vision Meets Private Aviation

Make a request

A private jet costs between 4000 to 10 000 USD per hour